Course Code |
Course Name |
Credit Hours |
Prerequests |
10032100
|
Remedial English
|
0 |
|
This is a three-hour non-credited English course offered to students who score poorly (i.e. below 50%) on the placement test. Since the major concern of this course is to improve the students’ proficiency before starting their ordinary university English basic courses and major courses taught in English, special emphasis has been placed on enhancing the students’ ability to effectively acquire the four language skills: reading, writing, listening, and speaking. Specifically, the course attempts to ensure an academically acceptable performance on the part of the students at the level of the English basic courses. Moreover, the course aims at expanding students’ vocabulary needed for various tasks. |
11000101
|
Islamic Culture
|
3 |
|
This course aims to establish the concept of Islamic culture and its position among the other international cultures, its position in the Muslim life, its sources, its bases and its characteristics. It also aims to introduce the Islamic culture in faith, worship, relations, morals, and knowledge, to discuss the clash between cultures in addition to Globalization, Human Rights, Woman Rights, Democracy and other contemporary issues. |
11000102
|
Arabic Language
|
3 |
|
This course aims to improve the level of students in language skills and various literary, read and absorb and express written, and oral and tasted literary, through texts flags authors and poets in different eras, lessons in grammar and spelling, and brief definition months dictionaries and Arab old ones the modern and how to use them. This course aims to implement the Arabic language in the areas of reading and expression of both types oral and written communication. |
11000103
|
English Language I
|
3 |
|
This is a three credit-hour university-required English language course designed for students who need to work on the four skills of the language: reading, writing, listening, and speaking. The development of vocabulary and skills of comprehension are integral parts of the course. In addition, various reading strategies (making predictions, identifying main ideas, reading for details, relating information in the text to life experience) are introduced and developed through a wide range of topics for reading and writing. The course encourages a more analytical and independent approach to study and helps prepare the students for any subsequent exam preparation. |
11000105
|
Palestinian Studies
|
3 |
|
The course is mandatory for university students from various disciplines, so it does provide students with knowledge and `information about the Palestinian reality and in particular the political developments of the Palestinian cause since its inception until the present day in line social and economic developments and political which constitute the main pillars for the study of the Palestinian political reality. This course aims to study Palestinian issue from its begging until present day in social, economic and political issue. |
11000108
|
Community Service
|
1 |
|
11000117
|
Leadership and Communication Skills
|
1 |
|
11000127
|
Introduction to Computer Science
|
1 |
|
11000322
|
English Language -II
|
3 |
|
This is a three-credit hour university-required English language course which is offered to students majoring in Sciences, Engineering, Agriculture, Veterinary, and Information Technology ... etc. Students in this course will be exposed to a range of science-based writings in English that supply students with samples of the kind of academic English they are likely to encounter in their textbooks. Exercises on grammar, vocabulary and textual organization are geared towards developing students’ observational and analytical skills that aid comprehension. The course uses an integrated approach which allows for communicative interaction in the class to actively test and broaden the listening and speaking abilities of the students. Furthermore, the acquisition of vocabulary items will be reinforced through their use in written sentences. Additional training in writing will be given through questions and answers, summaries of principal ideas in a reading passage and the preparation of reports. |
Course Code |
Course Name |
Credit Hours |
Prerequests |
10211101
|
Calculus I
|
3 |
|
This course covers the concepts of function, inverse function, models, limits, continuity and derivatives, the differentiation rules and their applications, related rates, linear approximation and hyperbolic functions. In addition to the mean value theorem, indeterminate forms and L' Hospital's rule, curve sketching and optimization problems. |
10211102
|
Calculus II
|
3 |
|
Definite integral and its properties, limited integration, integration of compensation, the space between two curves, volumes of revolution, ways of integration (integration by parts, integration of partial fractures, integration of trigonometric functions and integration with compensation trigonometric functions), integrals ailing, the length of the curve and the area of surfaces of revolution, final sequences and series, tests of convergent series, power series, Taylor series. |
10211201
|
Calculus III
|
3 |
|
Topics covered in this course include: parametric equations and polar coordinates; vectors in R2 and R3 & surfaces; vector-valued functions; partial differentiation with applications; multiple integrals. |
10211202
|
Engineering Mathematics
|
3 |
|
Classification and solution of first order equation with application, higher order and solution , power series and solution also the student will learn the fundamental of partial differential equation, method of solution of first and second order nonlinear partial differential equation |
10216230
|
Probability and Statistics for Engineers
|
3 |
|
Topics covered in this course include set theory, relative frequency and probability, joint probability and independent events, random variables, distribution functions, density functions, Gaussian random variables, multiple random variables, joint-distribution functions, joint-density functions, conditional distribution functions, central limit theorem, random processes (stationary and independent), correlation functions, covariance, Gaussian random processes, spectral characteristics of random processes, the power density spectrum, cross-power spectrum, and the relation between correlation functions and power density spectra. |
10221101
|
General Physics I
|
3 |
|
This course covers the following topics: motion in one and more dimensions, the laws of motion with an application of Newton’s laws, vector quantities, work and mechanical energy, linear momentum and collisions, and rotational dynamics |
10221102
|
General Physics II
|
3 |
|
This course is a study of the following topics: electric charges; forces and fields; electric potential and electric potential energy; electrical capacitance electric elements like capacitors, resistors, and conductors; electric current and direct-current circuits; magnetic fields; magnetic force; induction; and RC and RL circuits. |
10221115
|
General Physics Lab. for Engineering Students
|
1 |
|
This lab is offered to non-physics students. In this lab, experiments related to topics mostly covered in General Physics I (10221101) and General Physics II (10221102) are conducted. These include experiments on CRO and Ohm’s law potentiometer; Wheatstone bridge (AC and DC); capacitance and RC circuit; Joule’s constant; acceleration and speed of sound; viscosity; Newton’s 2nd law; simple harmonic motion; Boyle’s law; and Archimedes’ principle. |
10231101
|
General Chemistry 1
|
3 |
|
A compulsory 3-lecture course that is mainly designed to give students a knowledge of the most important chemical principles such as atomic structure and periodic table, mass relationships in chemical reactions, reactions in aqueous solutions, gases, thermo chemistry, quantum theory and the electronic structure of atoms, periodic relationships among the atoms, basic concepts of chemical bonding, molecular geometry and hybridization of atomic orbitals. |
10231102
|
General Chemistry II
|
3 |
|
A compulsory 3-lecture course that is a continuation of General Chemistry (I). It is designed to introduce some basic chemical facts and theories about solutions, kinetics, dynamic equilibrium, thermodynamics, electrochemistry and nuclear chemistry |
10231107
|
General Chemistry 1 Lab.
|
1 |
|
A compulsory practical course, designed to introduce the students to various experimental practices used in general chemistry, such as accurate weighing, performing basic chemical methods such as filtration, titration and gravimetric analysis, make simple metathesis and redox reactions, calorimetry experiments and calculations. |
10231108
|
General Chemistry II Lab.
|
1 |
|
A compulsory practical course that is a continuation for skills gained in Chemistry 10231107 course. The student is expected to use what he/she learned in new techniques such as the synthesis and analysis of aspirin, molar mass of a solid from freezing point depression phenomena, experimental determination of the reaction rate law. The course involves other topics such as: reaction kinetics, chemical equilibrium, aqueous solutions and pH concept, bleach analysis, thermodynamics and electrochemistry. |
10606102
|
Engineering Drawing
|
2 |
|
Developing the engineering student's ability to express his ideas through drawings, so that he can draw any design in a way that specialists can understand and manufacture, according to agreed standard standards regarding shape and designation. Manual techniques are covered in this course using only known drawing tools. |
10621100
|
Engineering Workshop 1
|
1 |
|
Development of basic skills in fields of manual sheet metal fabrication, welding processes, and household electric circuits. Students should perform in individual practical exercises. |
10621101
|
Engineering workshop 1 Practical
|
0 |
|
This is the practical part of the previous course. |
10626251
|
Engineering Numerical Analysis
|
3 |
|
Numerical analysis is concerned with finding numerical solutions to problems, especially those for which analytical solutions do not exist or are not readily obtainable. This course unit provides an introduction to the subject and treats the topics of solving nonlinear equations, both in one variable and in many variables, solving linear systems of equations and of approximating functions by polynomials. These topics are of great practical importance in science, engineering and finance, for example, and also have intrinsic mathematical interest. The course unit concentrates on theoretical analysis and on the development of practical algorithms |
10626301
|
Introduction to Professional Engineering Concepts
|
3 |
|
This course lays the foundations for the professional development components of the engineering degree. It provides students with the awareness and understandings of the roles and responsibilities of Professional Engineers in society with respect to the environment, ethics, law, equity, culture, public, economic context, and worker safety and health considerations. It also introduces the technical and other forms of work terms and/or work experience report preparation, understanding national and international placement standards, and engineering logbooks. Finally the course shall provide the students with effective technical writing, communications skills, interview techniques, skill assessment and analysis, career prospective. |
10631301
|
Engineering Economy and Feasibility Studies
|
3 |
|
This course covers the fundamental tools and concepts of economical evaluation of business and engineering projects such as cash flow diagrams, discounted cash flow, break even and minimum cost analysis, present value, future value, net present value, interest rates, decision making analysis and depreciation. The course also covers fundamentals of feasibility studies such as: Terms of reference, Details and problems of the current system, Study methodology, possible solutions & recommendations including a description of the costs and benefits to the enterprise. |
10636111
|
Computer Programming
|
3 |
|
Review of the methods of analysis and logical thinking to solve various issues, and students learn to find solutions using the flow diagram of the (flowcharts) and Zip Assistant (Pseudo code) and follow-up solutions to detect and correct logical errors. It also gives the student C++ language include input and output sentences, expressions, variables and constants, control sentences, redundancy and control, as well as matrices, functions, and indicators, also given an introduction to compositions, entities and structures. |
10661211
|
Introduction to Materials Engineering
|
3 |
|
10661212
|
Structure of Materials
|
3 |
|
10661213
|
Thermodynamics of Materials
|
3 |
|
10661214
|
Metals and Alloys
|
3 |
|
10661215
|
Fluid & Thermal Sciences
|
3 |
|
10661216
|
PhaseTransformation and Kinetics
|
3 |
|
10661217
|
Vacuum and Thin Film Materials Technologies
|
3 |
|
10661311
|
Polymeric Engineering Materials
|
3 |
|
10661312
|
Mechanical Properties of Materials
|
3 |
|
10661313
|
Electrical & Magnetic Materials
|
3 |
|
10661314
|
Biomedical Materials
|
3 |
|
10661315
|
Composites Materials
|
3 |
|
10661316
|
Electronic Device Materials and Fabrication
|
3 |
|
10661411
|
Corrosion Science and Engineering
|
3 |
|
10661412
|
Fracture and Fatigue of Materials
|
3 |
|
10661413
|
Materials Laboratory
|
1 |
|
10661414
|
Mechanical Properties Laboratory
|
1 |
|
10661415
|
Magnetic and Optical Laboratory
|
1 |
|
10661416
|
مختبر البوليمر
|
1 |
|
10661417
|
Thermodynamic and Kinetic Laboratory
|
1 |
|
10661418
|
Materials Characterization Lab.
|
1 |
|
10661419
|
Internship I
|
3 |
|
10661431
|
Advance Material Science
|
3 |
|
10661432
|
Advanced Materials Charaterization Techniques
|
3 |
|
10661433
|
Ceramic Materials
|
3 |
|
10661434
|
Physical Metallurgy
|
3 |
|
10661437
|
Growth Aspects of Semiconductor
|
3 |
|
10661439
|
Materials Processing
|
3 |
|
10661440
|
Process and Product Design
|
3 |
|
10661591
|
Graduation Project I
|
2 |
|
10661594
|
Grauation Project II
|
3 |
|
11032101
|
English in the Workplace
|
3 |
|
This is a three-hour non-credited English course offered to students of Economics and Administrative Sciences and Engineering. This course is designed to train SENIOR students in these faculties to communicate effectively in the business world. It focuses on practical oral and written business communication principles and applications with particular emphasis on writing, sending and answering e-mails, writing proposals for field projects and discussing them with an audience as well as training students to prepare and execute presentations and to express themselves orally. Students are also trained to use modern technology in communication and to contact/ communicate with their instructors through the university e-learning MOODLE program. |